A watch not to be missed, AP 15707CE Royal Oak Offshore Ceramics!

Recently, I bought this Audemars Piguet AP 15707CE, and share it with everyone today!

Due to its high recognition and appearance, the Royal Oak is an important product line of Audemars Piguet, and Audemars Piguet is also working hard to make changes in materials and plates to meet the needs of different consumers. ROO Diver is available in three commercially available models (non-limited), including 15703 stainless steel, 15706 forged carbon, and 15707 ceramic.

Weight: stainless steel > ceramic > forged carbon

Anti-wear: ceramic > forged carbon > stainless steel

Grinding: Ceramic = Stainless Steel > Forged Carbon (Because of the material factor, the forged carbon surface case is not brushed and polished)

This 15707CE is still scarce. It is said that so far (2014 Feb) has produced less than 400 pieces, and it is said that the reason is that the ceramic case with extremely high hardness (6X) has to be polished and brushed like the stainless steel case, which takes several times. Also because it is scarce, it is still limited to the store, without any discount. If you can meet the watch, you can buy it, don’t compare it.

In addition to the case, the crown and the knob of the chronograph ring are also ceramic. The clasp, the back cover, and the joints with the rubber strap are all titanium alloy. Look carefully at the polishing on the case, it is meticulous. Highly polished, brushed, chamfered, meticulous. The dial of the Mega Tapisserie pattern is matte black, not as bright as the 15706, it may be designed to give a contrast between the dial and the case (the ceramic case is much more dazzling than the forged carbon). 42mm wide and 13.9mm thick.

Through the back, you can clearly see the 3120 movements. Like my RO 15300 white surface, the table with the same movement, the table “grid” is very different.

I have been working for a month without any wear and tear. And wearing it is actually very low-key, I think the black case is the main reason.

Not much to say, there are pictures to prove, look at it!

Omega and Rolex which is better

In addition to watching time, watches are also very good decorations, then the name Omega and Rolex’s name must be heard by everyone, today I will from the brand origin, fashion, cost-effective and many other aspects Comparing the next two brothers, which one is better for Omega and Rolex? I believe everyone will read it and have their own judgment.

  1. Analyze Omega and Rolex from the influence of the brand.

Omega has a long history from the origin of the brand. Over the past 150 years, Omega has established itself as a pioneer in the world watchmaking industry and has achieved remarkable achievements. Rolex has been the leader of the global watch industry in the 20th-century mechanical watch era. Today, excellent craftsmanship and technology still make Rolex maintain its leading position in the watch industry. At present, Rolex has branches in more than 20 major cities around the world, with an annual output of about 1 million, and its sales are stable in Swiss watches. Leading the industry, Rolex is also known as one of the most valuable brands.

In comparison, Rolex is better than brand influence.

2, from the appearance of fashion contrast Omega and Rolex which is better

In fact, compared with the appearance of the two brands, the two brands have different styles. After all, the two brothers are different styles. Rolex’s style is biased towards mature and stable business people. The appearance is mature and domineering, giving people a kind of Very solemn feeling, full of gas. But sometimes it is too conservative; and the shape of Omega is mainly fashionable and beautiful, and may not be as domineering as Rolex, but it is definitely at the forefront of fashion, giving people a very handsome feeling.

So in terms of fashion, Omega is slightly better.

3, from the price point of view, Omega and Rolex which is better

From the perspective of durability, Rolex’s quality is definitely better than Omega’s. Rolex’s main quality is of stable quality. Both are world famous watches. The price of each brand watch is different, but the same grade of Rolex is definitely the price. It is a little higher than Omega.

For a penny and a share of goods, the prices of the two brands are different. If you say that you have to use Rolex 30,000 yuan and Omega 50,000, it is definitely not comparable. The quality Rolex is slightly better, but the price/performance ratio is not good, it is a draw.

In fact, radish greens have their own love, some people like Rolex’s domineering side leakage, and some people like Omega’s young and handsome

Rolex watch is Inaccurate. What caused it?

Many Rolex wearers will encounter a problem, the watch will be fast and slow. Eventually caused the phenomenon of inaccurate time. Sometimes we are busy because of work, so we don’t have time to repair the shop. We can’t control it ourselves, but we still have a way to avoid it. Let it happen less. Let’s share the reason why the watch is not allowed to go. You can avoid it by paying attention.

Generally, watches are not allowed to go. This is the case with mechanical watches. The reason is that the travel time of mechanical watches is affected by many factors. If we do not have enough maintenance measures, it is easy to have abnormal walking conditions. Time is measured as a continuation of the exact same iterative process, and one compares time with a known periodic iterative process. The mechanical watch uses the mechanical oscillator composed of the balance spring as the time base. The accuracy of the mechanical watch will mainly depend on the stability of the balance period of the balance spring. However, the oscillating stability of the balance spring is affected by the positional change.

The main positional change is the change of the plane and the vertical plane. The plane has 2 facades and only 3 of them are: the crown is down, the crown is leftward, and the upper handle is up to the right. This counts a total of 5 positions. The change of position firstly causes the change of the friction surface of the balance shaft, the friction surface increases, and then the imbalance of the balance wheel is more obvious and prominent under the action of gravity, and additional torque acts on the swinging swing. On the wheel, as well as the gravity of the hairspring, the balance of the watch balance spring system is affected by the size of the oscillation cycle at each position.

In fact, there is another important cue point is that you must fill the clockwork as much as possible, which is very important for mechanical watches. If there is not enough exercise, what we directly affect is the degree of tightening of the mechanical clockwork. You must pay attention to this.

Where are the watch maintenance, tell you 10 steps !

We all know that inside the watch maintenance, the most important thing is the movement maintenance.

With the improvement of everyone’s aesthetic taste and the improvement of economic strength, many friends chose to start from the 2892 movement when choosing the first watch. But after the repair and maintenance, it is not easy. After your love watch is sent to the repair center, the correct treatment method, and ultimately these 10 steps, you may wish to serve as a reference for future maintenance.


The cleaning of the outer casing is usually carried out by ultrasonic cleaning to remove residual stains that are invisible to the naked eye; in addition, the flexibility of the movable outer ring is ensured. For the silicone grease consumed by the snap, the head, and the bottom cover, add an appropriate amount and replace the aging waterproof rubber ring to ensure the waterproof effect.

Movement removal and assembly

The handling of the movement is the top priority in maintenance and can be divided into three modules: disassembly, washing, and loading. “Removing” means checking the parts in question, replacing worn parts and screws with residual deformation. When “washing”, you need to use 120# solvent gasoline, after two washing and bleaching steps, and then carefully check the residual stain with 10 times the lens, check whether the gemstone eye is bright, whether the shaft is bright or not, and finally put it. When the oven is dried at 50 degrees, the movement will become as clean as new.

“Loading” is the assembly. During the assembly process, the watchmaker needs to ensure that the movement 6 large wheel train runs smoothly and smoothly. It is required that the drive train wheel is flat, the transmission is smooth, and there is a gap in the axial direction to ensure that the idling has a swirl; the original motion system can completely release the spring power, and does not slip when the spring is tightened; and the core component of the movement is delayed. It is necessary to ensure that the bouncer’s bounce is powerful, the balance wheel is flexible, the balance spring is flat and the frame is fine, and the fine adjustment screw is in the middle effective section; the clockwork pin is tied to the upper and the needle when the needle is tight, the gear position is obvious, and the rest is accurate. The automatic winding system, you need to ensure that the automatic tow can be freely loaded after the full line, there will be no teeth and flywheel phenomenon when manually winding; the last calendar is to check the confirmation date is powerful and accurate, not allowed to jump half or A slow-jumping calendar appears.

Come on

Refueling is not a washing oil, nor is it just adding a single oil. There is a strict regulation on the amount of oil and what part of the oil is added. The added “oil” is generally the following four types: ointment, heavy oil, thin oil, horse fork oil. The amount of oil should not be higher than 1/2 of the stone bowl. The shaft of the bowl does not hang oil, and the parts must not have oil except the contact surface, so as to ensure the lubrication and beauty of the parts. For special brand requirements, you have to follow the brand requirements.


For maintenance, the adjustment of the four orientations has ensured the accuracy of the travel time. The requirement is that the face and face hem of the watch should reach 280 or more. When the 3, 6, and 12 words are downward, the swing should be above 260. Within 10 seconds, within 0.2 polarization, the lines are compact and clear.

Literal, needle

The literal surface cannot be offset, the three stitches are equal to the parallel spacing of the words, and the difference between the time and the minute is not more than 3 points, and the change is completed by 45 minutes to 0 points. The entire literal processing is done: the needle is dust-free, no new scratches or fingerprints. The new watch should be free to disassemble. These seemingly trivial things, but all require the watchmaker to have a high degree of professionalism and patience.

Movement assembly inspection

When tightening the screws, it is necessary to strictly follow the size of the screwdriver and the screw to ensure that the screw holes cannot be scratched, the screw head cannot be scratched, and the splint is clean and dust-free.


Coming to the husking step means that the assembly on the hardware is about to be completed. When installing the shell, ensure that the device for fixing the casing is stable and effective. Align the core with the tube, and the offset should not occur. The second hand should have a safe distance from the cover. The automatic turret does not scratch the case back cover, and the bottom cover screw has no stains. Screw in smooth and seamless.


For waterproof ones, watchmakers with professionalism and responsibility during maintenance often leave room for the waterproof ability of the watch. As much as possible to ensure that the watch can have, even slightly improve the waterproof ability.


Finally, the watch is placed on the autobiography to check whether the watch can guarantee perfect operation for more than 36 hours under the condition of rotation.

Whole shell inspection

The inspection of the whole shell is the last step in the return of the watch to the customer. Although it is almost finished, it must be confirmed that the watch case and the strap are clean. Check again whether the bottom cover is tight and seamless, and whether the ear cover is tight. Sticking head, whether the snap switch is safe and easy to operate, the needle on the head is moderately strong, and there is no deformed ear.

Rolex black and blue circle purchase experience

I like Rolex, it can be said that the benevolent see benevolence. Rolex black and blue circle 116710BLNR is my favorite one. Although there is a general price in mind, it has been inquiring in various channels. Also considered buying genuine, asked, and there is no satisfactory discount, the sales said to send me this to send me, began to seduce me, what shopping mall cash coupons, looking for the mall ox can also give me a cheaper point. All are routines, I don’t think too much. I will think about it later, even if I bought a genuine product, I will not always wear it.

I have been chatting with the customer for a long time, from astronomical geography to piano chess and calligraphy, from Casio to Romeo, from jade to Patek Philippe, from Saint Seiya to Rolex, from the turbo to the tourbillon, this customer service sincerity I see It’s not bad. The price is cute, the watch is high-end, very good! Not too much circle, I told the customer service that I saw the Rolex Rolex Greenwich II double time zone chronograph 116710BLNR, customer service, I immediately sent a lot of real shots, and real shot video, I saw more after watching Itchy in my heart.

I don’t have much to say about the delivery of the Shenma, and I tried the luminous effect first when I got the watch. Oh, it’s just! Like it! No loss is a Rolex re-enactment, this technology really does not say. However, the character of my three-minute heat is not expected to wear for a long time. This is the reason why I don’t want to buy genuine products. I spend so much money, buy a genuine one, I don’t like it in a few days, I don’t have a collection. Hobby!

The late gold Rolex submariner series 116613LN black water ghost

The previous understanding of Rolex was old-fashioned, Noumea riches, and the most important thing was vulgarity. Maybe it was when I was young, I didn’t know where to instill it, but my understanding, it was not what I thought. Rolex has always been the overlord in the field of watches, solid workmanship and materials, strong and tough style and at least 100,000 productions per year and can be very popular, perhaps only Rolex can have this status. Teacher Liu Xingli once commented on Rolex “If you are afraid of trouble or have difficulty choosing, then choose Rolex.” The world’s most understandable and least understandable person will choose Rolex. Although this is a joke, it also reflects the brand characteristics of Rolex’s elegance and common taste. Dog teeth ring, small blisters, classic skull strap, the most important is the brand spirit, brand value. Classic, durable, and synonymous with precision.

There is no need to say much about the quality of Rolex.

Looking through all the dictionaries, there is no single word that can define what we do: not “traditional”, although our craft is forever; “infinity” is too limited; “long-lasting” cannot describe lasting; “innovation” can only touch Fur, no word can define what we do, only the Rolex!

Finally, I  can go home and write the first homework, and read the picture~

Purchase Rolex Watch Notes

The popularity of Rolex watches in China is quite high. When it comes to Rolex, it is reminiscent of local tyrants, diamond kings and so on. But this also can’t stop many fans from loving him, but there may be only one piece in a counter, even if it has been worn. What are the precautions for purchasing a Rolex watch?


Rolex is a favorite watch of many second-hand watches and pawnshops, with high visibility and good hands. The style is rich and the circulation is high, but you can only see the appearance when you buy it, you can’t see the movement, so you can’t confirm whether the movement is original. There are many movements that are often stolen into cheap ETA common movements. If you don’t open the bottom cover, you can’t know the true and false, so letting the seller open the cover or go to the Rolex Service Center to verify is basic protection.

Upper circle

The regular dog ring is not discussed for a while, most people know how to buy. For example, the sports bezel, the current ceramic bezel is also more, the surface lettering and embedded platinum coating, it is easy to distinguish whether there is wear and tear when looking at the old and new, and also check the inverted triangle on the bezel when purchasing, can you The inverted triangle at 12 o’clock on the quasi-dial can be a straight line.


Let’s talk about the calendar. Nowadays, Rolex is mostly an instant jump calendar, which means that when the game is about 12 o’clock in the evening, the action of changing the calendar is completed in an instant. Then we should try the instant jump function when buying. Look at what time point this movement process occurs. If the distance between 12 points is within 10 minutes, there is no big problem.


The dial hands sometimes find fine hair or dust at the factory. If you buy them, you can’t see them when you look at them. If you look at them, you can’t see them when you buy them. In the next maintenance, you will go to the Rolex Watch Service Center to clean them. It is. Also carefully observe whether the three needles are in a straight line at 3, 6, 9, and 12.

Case strap

The case strap is a very easy place to wear. Then, the Rolex watch that has just been manufactured must be perfect on the watch case. It is best to follow our habits when checking, where to check for scratches.


Late for a long time to buy a watch, start the Rolex submariner series 114060 no history ghost

After a few days of falling in love with the water ghost. The main thing is whether or not to buy a piece that is very expensive for me. I have never been flustered with luxury goods. It is good to eat and wear as long as it is pragmatic. The brand does not matter. Maybe it is because of personality.

When this question is pending, the wife looks at the “Golden Star Show.” Inside is exactly Venus to talk about luxury, which she said: buy what you want, don’t buy what you need. It means to say: Most of our consumption now is not the function of needing this thing, but want it. Just like me, if you want to see the time, several tables are very new. But why do you want to buy it? Because you want it, for psychological satisfaction.

Yes, this is the consumption trend of the non-material society, and more tends to the spiritual level.

Then, I went to the forum, read the post, and learned about Rolex and the water ghost. Understand the brand value and spirit of Rolex, and further strengthen the determination to buy water ghosts.

I chose the no-water ghost, the reason for choosing no calendar is a little 1000 words, because I would say that the reason for choosing no-blood blisters will definitely lead to a war of words. I can only say that the calendar is very good, but I like it. All our loved ones, and it is good to respect each other’s choices.

After wearing it for a while, I feel very good! The water ghost is good-looking, and the history of the Rolex family is low-key, not eye-catching. But even if you don‘t look at the brand logo, the texture of the material is first-rate to kill a lot of watches. Already looking at the next piece of the goal, I prefer the gold and white wire rod nails.